PLEXIGLAS® Textures come in a variety of classic and modern surface structures, combined with modern colours or rainbow effect.
The robust qualities of PLEXIGLAS® Textures mean that, as long as the appropriate conditions exist, it can be sawn, drilled, milled, ground and polished without problem. Twist drill bits must have an “acrylic glass face”. When polishing, the contact pressure should be low. During machining, the respective accident prevention regulations as well as the tool manufacturer’s specifications must be observed. PLEXIGLAS® Textures is suitable for laser cutting. The gloss of the laser cut changes as the shock resistance increases. Wiping with light petroleum (benzine) produces clear edges.
PLEXIGLAS® Textures has similar bonding properties to the PLEXIGLAS® XT basic types, e.g. with the solvent-based adhesives ACRIFIX® 1S 0116 and 1S 0117 as well as the gap-filling polymerization adhesives ACRIFIX® 1R 0192 and 2R 0190.
The forming conditions correspond to those of the PLEXIGLAS® XT basic types. The thermoforming temperature should be between 140 °C and 160 °C, the range in which the material is rubbery-elastic. Predrying is not necessary provided the sheets are stored appropriately and with their PE surface protection films.
Suitable for cleaning are:
- Lukewarm water with a little dishwashing detergent
- Pure light petrol (white spirit)
- Soft, moist viscose sponge
- Sponge cloth
- Soft, damp, lint-free cloth
- Glove lining fabric
- Shammy Leather
- Shower wiper with soft rubber lip
- Cotton tea towel
Suitable for disinfection are:
- isopropanol (2-propanol)
Abrasive cleaning agents are generally not suitable for cleaning PLEXIGLAS®.